The last decade has been a transformational time in lighting. LEDs have taken over every application, and nowadays their efficiency and low cost lumens are taken for granted.
But the big improvements brought by LEDs may have lured the lighting industry into some bad habits. Many have become quick to use blanket illumination and tolerate spill light in the knowledge that ‘LEDs are really efficient’. But now, with the climate crisis pushing sustainability to the top of the agenda and energy prices at record highs, it’s becoming clear that no-one can no longer afford to be complacent.
It appears that the time has arrived to fundamentally reappraise the standard approach to lighting design. Lighting experts from ERCO have recognised this need for a reassessment of our assumptions, and have been considering this issue for some time. The conclusion? The focus needs to switch to the effectiveness of the light in a space.
Efficiency is no guarantee of sustainability.
Those designing lighting for a space need to choose carefully where to illuminate, and to think in terms of the illumination that’s achieved in lux/watt rather than the efficiency of the light fitting in terms of luminaire lumens/watt.
Specifically, what’s being advocated is a combination of low glare, precisely-targeted task lighting and a general movement towards the illumination of vertical surfaces over the floor. It’s about directing light exactly where it’s needed for tasks and where it’s most effective for human perception – and reducing it everywhere else.
Energy is a limited and expensive resource. So those planning with light need to be more effective with the light and decide where to not put energy, because that’s where the savings will be found. This approach can lead to a big reduction in the connected load. Done well, it can substantially reduce energy consumption because it only puts light where it’s needed.
This reduction of light in certain places is balanced by an increased emphasis on people-centric lighting designed for visual comfort. A key part of this is switching the focus from the floor to the vertical surfaces. To make a space feel bright, the walls need to be illuminated as that’s what’s in the visual field.
‘If 100lx is put on the wall instead of the floor, the room feels three to five times brighter – just by illuminating a different surface.’
Better lighting with half the energy
Historically, walls haven’t been prioritised, although the latest version of the European indoor lighting standard EN 12464-1 now takes it more seriously.
In an office, for instance, the strategy of guiding light where human perception requires it would dictate that light is delivered to the desktops, if that’s where light is required. In a 100 square metre office, desks could take up 20 square metres of the space. If you light the walls and the desks only, then compared to uniform blanket illumination, about half the energy could be saved while creating a better and apparently brighter visual space for people.
The design rethink began with spotlights because they are, after all, all about putting light exactly where it’s needed. Many spotlights available on the market use a combination of chip-on-board (CoB) LED modules with reflectors. The combination achieves a good luminaire lumen/watt measurement, but these generate a large uncontrolled corona of light around the beam and in the end the stray light is wasted light. Much of the light coming from the CoB modules isn’t hitting an optical system, and consequently it goes everywhere. Additionally, the very act of reflection results in a reduction of light.
ERCO spotlights, by contrast, use lens systems with single high-powered chips. This tiny but bright point of light is much easier to control into a narrow beam of effective light. ERCO mounts the chips themselves into their own printed circuit boards before pairing them with a bespoke lens design.
Although this construction has nominally lower lm/W values, it brings up to 20 per cent more light to the target surface compared to rivals. This means that planners who only look at the lm/W values on a luminaire’s technical data sheet are giving away the potential for sustainable lighting focusing on more light on the target area as well as for energy savings.
The lx/W metric is the key to effectiveness
The latest generation of the ERCO Parscan spotlight for instance may have a high lumen-to-watt ratio of 105lm/W, but it’s in its ultra-high lx/W metric compared to other luminaires that its effectiveness is really proved.
One additional important component to the philosophy is the avoidance of glare. If there is glare, the visual contrast is lowered and consequently more light needs to be added to the task. After all, glare is by definition wasted light.
The combination of effectively targeted light and high visual comfort for people may sound simple at first glance, but in its implementation it can be radical. But with the climate crisis looming, and those lumens no longer cheap, a radical approach that recalls perception-oriented lighting design with high visual comfort is probably just what is needed.
About ERCO
ERCO is an international specialist for high-quality and digital architectural lighting. The family-owned company, founded in 1934, operates globally in 55 countries with independent sales organisations and partners.
ERCO understands light as the fourth dimension of architecture – and thus as an integral part of sustainable building. Light is the contribution to making society and architecture better and, at the same time, preserving our environment. ERCO Greenology® – the corporate strategy for sustainable lighting – combines ecological responsibility with technological expertise.
At the light factory in Lüdenscheid, Germany, ERCO develops, designs and manufactures luminaires with a focus on photometric optics, electronics and sustainable design. The lighting tools are developed in close collaboration with architects, lighting designers and electrical designers. They are used primarily in the following applications: Work and Culture, Community and Public/Outdoor, Contemplation, Living, Shop and Hospitality. ERCO lighting experts support designers worldwide in transforming their projects into reality with highly precise, efficient and sustainable lighting solutions.